the Matek F722-PX Flight Controller. This two combiantions enable Fixed Wing usage for the latest F722-PX Pixel OSD FC. The PDB breaks out common ports and solder pads for servos and esc connections and connects via a ribbon cable to the flight controller.

This board also uses the standard mounting hole patterns found in most Mini Quads and can also be used with other flight controllers, using solder pads to connect to the flight controller.

PDB

Input voltage range: 6~36V (2~8S LiPo) w/TVS protection
2x ESC power pads
High precision current Senor: 132A, 3.3V ADC, Scale 250
BEC 5A, 5V/6V/7.2V Adj
Soldering Holes & Pads

+ & – : Bettery & ESC power pads
Curr: Current sensor output
Vbat: Bettery voltage
G: Ground
3V3: LDO 3.3V 500mA
Vx: BEC 5V/6V/7.2V ADJ
SH1.0-8P connection

RX3 and S1~S10 are compatible with MATEKSYS Flight controller F722-PX
BEC Vx output

Designed for Servos
DC/DC synchronous buck regulator
Voltage adjustable, 5V Default, 6V or 7.2V via jumper
Continuous current: 5 Amps, Max.5.5A
Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)
Short-circuit tolerant (2 seconds)
Physical

Mounting: 30.5 x 30.5mm, Φ3mm
Dimensions: 41 x 36 mm
Weight: 9g